Struct BoundedU32 

pub struct BoundedU32<const MIN: u32, const MAX: u32>(/* private fields */);

An u32 constrained to be in the range MIN..=MAX.

Implementations

impl<const MIN: u32, const MAX: u32> BoundedU32<MIN, MAX>

pub const MIN_VALUE: u32 = MIN

The smallest value this bounded integer can contain.

pub const MAX_VALUE: u32 = MAX

The largest value that this bounded integer can contain.

pub const MIN: Self

The smallest value of the bounded integer.

pub const MAX: Self

The largest value of the bounded integer.

pub const fn new(n: u32) -> Option<Self>

Creates a bounded integer if the given value is within the range [MIN, MAX].

pub const fn const_new<const N: u32>() -> Self

Creates a bounded integer whose value is known at compile time.

Causes a compile-time error if N is not in the valid range.

pub const fn new_ref(n: &u32) -> Option<&Self>

Creates a reference to a bounded integer from a reference to a primitive if the given value is within the range [MIN, MAX].

pub const fn new_mut(n: &mut u32) -> Option<&mut Self>

Creates a mutable reference to a bounded integer from a mutable reference to a primitive if the given value is within the range [MIN, MAX].

pub const unsafe fn new_unchecked(n: u32) -> Self

Creates a bounded integer without checking the value.

Safety

The value must not be outside the valid range of values; it must not be less than MIN_VALUE or greater than MAX_VALUE.

pub const unsafe fn new_ref_unchecked(n: &u32) -> &Self

Creates a shared reference to a bounded integer from a shared reference to a primitive.

Safety

The value must not be outside the valid range of values; it must not be less than MIN_VALUE or greater than MAX_VALUE.

pub const unsafe fn new_mut_unchecked(n: &mut u32) -> &mut Self

Creates a mutable reference to a bounded integer from a mutable reference to a primitive.

Safety

The value must not be outside the valid range of values; it must not be less than MIN_VALUE or greater than MAX_VALUE.

pub const fn in_range(n: u32) -> bool

Checks whether the given value is in the range of the bounded integer.

pub const fn new_saturating(n: u32) -> Self

Creates a bounded integer by setting the value to MIN or MAX if it is too low or too high respectively.

pub const fn new_wrapping<__Z: LargerInt>(n: __Z) -> Self

Creates a bounded integer by wrapping using modular arithmetic.

For n in range, this is an identity function, and it wraps for n out of range.

The type parameter Z must be any integer type that is a superset of this one.

pub const fn from_str_radix(src: &str, radix: u32) -> Result<Self, ParseError>

Converts a string slice in a given base to the bounded integer.

Panics

Panics if radix is below 2 or above 36.

pub const fn get(self) -> u32

Returns the value of the bounded integer as a primitive type.

pub const fn get_ref(&self) -> &u32

Returns a shared reference to the value of the bounded integer.

pub const unsafe fn get_mut(&mut self) -> &mut u32

Returns a mutable reference to the value of the bounded integer.

Safety

This value must never be set to a value beyond the range of the bounded integer.

pub const fn pow(self, exp: u32) -> Self

Raises self to the power of exp, using exponentiation by squaring. Panics if it is out of range.

pub const fn div_euclid(self, rhs: u32) -> Self

Calculates the quotient of Euclidean division of self by rhs. Panics if rhs is 0 or the result is out of range.

pub const fn rem_euclid(self, rhs: u32) -> Self

Calculates the least nonnegative remainder of self (mod rhs). Panics if rhs is 0 or the result is out of range.

pub const fn checked_add(self, rhs: u32) -> Option<Self>

Checked integer addition.

Returns None if the result would be out of range.

pub const fn saturating_add(self, rhs: u32) -> Self

Saturating integer addition.

pub const fn wrapping_add(self, rhs: u32) -> Self

Wrapping (modular) integer addition.

pub const fn checked_sub(self, rhs: u32) -> Option<Self>

Checked integer subtraction.

Returns None if the result would be out of range.

pub const fn saturating_sub(self, rhs: u32) -> Self

Saturating integer subtraction.

pub const fn wrapping_sub(self, rhs: u32) -> Self

Wrapping (modular) integer subtraction.

pub const fn checked_mul(self, rhs: u32) -> Option<Self>

Checked integer multiplication.

Returns None if the result would be out of range.

pub const fn saturating_mul(self, rhs: u32) -> Self

Saturating integer multiplication.

pub const fn wrapping_mul(self, rhs: u32) -> Self

Wrapping (modular) integer multiplication.

pub const fn checked_div(self, rhs: u32) -> Option<Self>

Checked integer division.

Returns None if the result would be out of range, or if rhs is zero.

pub const fn wrapping_div(self, rhs: u32) -> Self

Wrapping (modular) integer division.

pub const fn checked_div_euclid(self, rhs: u32) -> Option<Self>

Checked Euclidean division.

Returns None if the result would be out of range, or if rhs is zero.

pub const fn wrapping_div_euclid(self, rhs: u32) -> Self

Wrapping (modular) Euclidean division.

pub const fn checked_rem(self, rhs: u32) -> Option<Self>

Checked integer remainder.

Returns None if the result would be out of range, or if rhs is zero.

pub const fn wrapping_rem(self, rhs: u32) -> Self

Wrapping (modular) integer remainder.

pub const fn checked_rem_euclid(self, rhs: u32) -> Option<Self>

Checked Euclidean remainder.

Returns None if the result would be out of range, or if rhs is zero.

pub const fn wrapping_rem_euclid(self, rhs: u32) -> Self

Wrapping (modular) Euclidean remainder.

pub const fn checked_neg(self) -> Option<Self>

Checked negation.

Returns None if the result would be out of range.

pub const fn checked_pow(self, rhs: u32) -> Option<Self>

Checked exponentiation.

pub const fn saturating_pow(self, rhs: u32) -> Self

Saturating exponentiation.

pub const fn wrapping_pow(self, exp: u32) -> Self

Wrapping (modular) exponentiation.

pub const fn checked_shl(self, rhs: u32) -> Option<Self>

Checked shift left.

pub const fn checked_shr(self, rhs: u32) -> Option<Self>

Checked shift right.

Trait Implementations

impl<const MIN: u32, const MAX: u32> Add for BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the + operator.

fn add(self, rhs: BoundedU32<MIN, MAX>) -> Self::Output

Performs the + operation.

impl<const MIN: u32, const MAX: u32> Add<&BoundedU32<MIN, MAX>> for u32

type Output = u32

The resulting type after applying the + operator.

fn add(self, rhs: &BoundedU32<MIN, MAX>) -> Self::Output

Performs the + operation.

impl<const MIN: u32, const MAX: u32> Add<&BoundedU32<MIN, MAX>> for &u32

type Output = u32

The resulting type after applying the + operator.

fn add(self, rhs: &BoundedU32<MIN, MAX>) -> Self::Output

Performs the + operation.

impl<const MIN: u32, const MAX: u32> Add<&BoundedU32<MIN, MAX>> for BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the + operator.

fn add(self, rhs: &BoundedU32<MIN, MAX>) -> Self::Output

Performs the + operation.

impl<const MIN: u32, const MAX: u32> Add<&BoundedU32<MIN, MAX>> for &BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the + operator.

fn add(self, rhs: &BoundedU32<MIN, MAX>) -> Self::Output

Performs the + operation.

impl<const MIN: u32, const MAX: u32> Add<&u32> for BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the + operator.

fn add(self, rhs: &u32) -> Self::Output

Performs the + operation.

impl<const MIN: u32, const MAX: u32> Add<&u32> for &BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the + operator.

fn add(self, rhs: &u32) -> Self::Output

Performs the + operation.

impl<const MIN: u32, const MAX: u32> Add<BoundedU32<MIN, MAX>> for u32

type Output = u32

The resulting type after applying the + operator.

fn add(self, rhs: BoundedU32<MIN, MAX>) -> Self::Output

Performs the + operation.

impl<const MIN: u32, const MAX: u32> Add<BoundedU32<MIN, MAX>> for &u32

type Output = u32

The resulting type after applying the + operator.

fn add(self, rhs: BoundedU32<MIN, MAX>) -> Self::Output

Performs the + operation.

impl<const MIN: u32, const MAX: u32> Add<BoundedU32<MIN, MAX>> for &BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the + operator.

fn add(self, rhs: BoundedU32<MIN, MAX>) -> Self::Output

Performs the + operation.

impl<const MIN: u32, const MAX: u32> Add<u32> for BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the + operator.

fn add(self, rhs: u32) -> Self::Output

Performs the + operation.

impl<const MIN: u32, const MAX: u32> Add<u32> for &BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the + operator.

fn add(self, rhs: u32) -> Self::Output

Performs the + operation.

impl<const MIN: u32, const MAX: u32> AddAssign for BoundedU32<MIN, MAX>

fn add_assign(&mut self, rhs: BoundedU32<MIN, MAX>)

Performs the += operation.

impl<const MIN: u32, const MAX: u32> AddAssign<&BoundedU32<MIN, MAX>> for u32

fn add_assign(&mut self, rhs: &BoundedU32<MIN, MAX>)

Performs the += operation.

impl<const MIN: u32, const MAX: u32> AddAssign<&BoundedU32<MIN, MAX>> for BoundedU32<MIN, MAX>

fn add_assign(&mut self, rhs: &BoundedU32<MIN, MAX>)

Performs the += operation.

impl<const MIN: u32, const MAX: u32> AddAssign<&u32> for BoundedU32<MIN, MAX>

fn add_assign(&mut self, rhs: &u32)

Performs the += operation.

impl<const MIN: u32, const MAX: u32> AddAssign<BoundedU32<MIN, MAX>> for u32

fn add_assign(&mut self, rhs: BoundedU32<MIN, MAX>)

Performs the += operation.

impl<const MIN: u32, const MAX: u32> AddAssign<u32> for BoundedU32<MIN, MAX>

fn add_assign(&mut self, rhs: u32)

Performs the += operation.

impl<const MIN: u32, const MAX: u32> AsRef<u32> for BoundedU32<MIN, MAX>

fn as_ref(&self) -> &u32

Converts this type into a shared reference of the (usually inferred) input type.

impl<const MIN: u32, const MAX: u32> Binary for BoundedU32<MIN, MAX>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<const MIN: u32, const MAX: u32> BitAnd for BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the & operator.

fn bitand(self, rhs: BoundedU32<MIN, MAX>) -> Self::Output

Performs the & operation.

impl<const MIN: u32, const MAX: u32> BitAnd<&BoundedU32<MIN, MAX>> for u32

type Output = u32

The resulting type after applying the & operator.

fn bitand(self, rhs: &BoundedU32<MIN, MAX>) -> Self::Output

Performs the & operation.

impl<const MIN: u32, const MAX: u32> BitAnd<&BoundedU32<MIN, MAX>> for &u32

type Output = u32

The resulting type after applying the & operator.

fn bitand(self, rhs: &BoundedU32<MIN, MAX>) -> Self::Output

Performs the & operation.

impl<const MIN: u32, const MAX: u32> BitAnd<&BoundedU32<MIN, MAX>> for BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the & operator.

fn bitand(self, rhs: &BoundedU32<MIN, MAX>) -> Self::Output

Performs the & operation.

impl<const MIN: u32, const MAX: u32> BitAnd<&BoundedU32<MIN, MAX>> for &BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the & operator.

fn bitand(self, rhs: &BoundedU32<MIN, MAX>) -> Self::Output

Performs the & operation.

impl<const MIN: u32, const MAX: u32> BitAnd<&u32> for BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the & operator.

fn bitand(self, rhs: &u32) -> Self::Output

Performs the & operation.

impl<const MIN: u32, const MAX: u32> BitAnd<&u32> for &BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the & operator.

fn bitand(self, rhs: &u32) -> Self::Output

Performs the & operation.

impl<const MIN: u32, const MAX: u32> BitAnd<BoundedU32<MIN, MAX>> for u32

type Output = u32

The resulting type after applying the & operator.

fn bitand(self, rhs: BoundedU32<MIN, MAX>) -> Self::Output

Performs the & operation.

impl<const MIN: u32, const MAX: u32> BitAnd<BoundedU32<MIN, MAX>> for &u32

type Output = u32

The resulting type after applying the & operator.

fn bitand(self, rhs: BoundedU32<MIN, MAX>) -> Self::Output

Performs the & operation.

impl<const MIN: u32, const MAX: u32> BitAnd<BoundedU32<MIN, MAX>> for &BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the & operator.

fn bitand(self, rhs: BoundedU32<MIN, MAX>) -> Self::Output

Performs the & operation.

impl<const MIN: u32, const MAX: u32> BitAnd<u32> for BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the & operator.

fn bitand(self, rhs: u32) -> Self::Output

Performs the & operation.

impl<const MIN: u32, const MAX: u32> BitAnd<u32> for &BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the & operator.

fn bitand(self, rhs: u32) -> Self::Output

Performs the & operation.

impl<const MIN: u32, const MAX: u32> BitAndAssign for BoundedU32<MIN, MAX>

fn bitand_assign(&mut self, rhs: BoundedU32<MIN, MAX>)

Performs the &= operation.

impl<const MIN: u32, const MAX: u32> BitAndAssign<&BoundedU32<MIN, MAX>> for u32

fn bitand_assign(&mut self, rhs: &BoundedU32<MIN, MAX>)

Performs the &= operation.

impl<const MIN: u32, const MAX: u32> BitAndAssign<&BoundedU32<MIN, MAX>> for BoundedU32<MIN, MAX>

fn bitand_assign(&mut self, rhs: &BoundedU32<MIN, MAX>)

Performs the &= operation.

impl<const MIN: u32, const MAX: u32> BitAndAssign<&u32> for BoundedU32<MIN, MAX>

fn bitand_assign(&mut self, rhs: &u32)

Performs the &= operation.

impl<const MIN: u32, const MAX: u32> BitAndAssign<BoundedU32<MIN, MAX>> for u32

fn bitand_assign(&mut self, rhs: BoundedU32<MIN, MAX>)

Performs the &= operation.

impl<const MIN: u32, const MAX: u32> BitAndAssign<u32> for BoundedU32<MIN, MAX>

fn bitand_assign(&mut self, rhs: u32)

Performs the &= operation.

impl<const MIN: u32, const MAX: u32> BitOr for BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the | operator.

fn bitor(self, rhs: BoundedU32<MIN, MAX>) -> Self::Output

Performs the | operation.

impl<const MIN: u32, const MAX: u32> BitOr<&BoundedU32<MIN, MAX>> for u32

type Output = u32

The resulting type after applying the | operator.

fn bitor(self, rhs: &BoundedU32<MIN, MAX>) -> Self::Output

Performs the | operation.

impl<const MIN: u32, const MAX: u32> BitOr<&BoundedU32<MIN, MAX>> for &u32

type Output = u32

The resulting type after applying the | operator.

fn bitor(self, rhs: &BoundedU32<MIN, MAX>) -> Self::Output

Performs the | operation.

impl<const MIN: u32, const MAX: u32> BitOr<&BoundedU32<MIN, MAX>> for BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the | operator.

fn bitor(self, rhs: &BoundedU32<MIN, MAX>) -> Self::Output

Performs the | operation.

impl<const MIN: u32, const MAX: u32> BitOr<&BoundedU32<MIN, MAX>> for &BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the | operator.

fn bitor(self, rhs: &BoundedU32<MIN, MAX>) -> Self::Output

Performs the | operation.

impl<const MIN: u32, const MAX: u32> BitOr<&u32> for BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the | operator.

fn bitor(self, rhs: &u32) -> Self::Output

Performs the | operation.

impl<const MIN: u32, const MAX: u32> BitOr<&u32> for &BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the | operator.

fn bitor(self, rhs: &u32) -> Self::Output

Performs the | operation.

impl<const MIN: u32, const MAX: u32> BitOr<BoundedU32<MIN, MAX>> for u32

type Output = u32

The resulting type after applying the | operator.

fn bitor(self, rhs: BoundedU32<MIN, MAX>) -> Self::Output

Performs the | operation.

impl<const MIN: u32, const MAX: u32> BitOr<BoundedU32<MIN, MAX>> for &u32

type Output = u32

The resulting type after applying the | operator.

fn bitor(self, rhs: BoundedU32<MIN, MAX>) -> Self::Output

Performs the | operation.

impl<const MIN: u32, const MAX: u32> BitOr<BoundedU32<MIN, MAX>> for &BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the | operator.

fn bitor(self, rhs: BoundedU32<MIN, MAX>) -> Self::Output

Performs the | operation.

impl<const MIN: u32, const MAX: u32> BitOr<u32> for BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the | operator.

fn bitor(self, rhs: u32) -> Self::Output

Performs the | operation.

impl<const MIN: u32, const MAX: u32> BitOr<u32> for &BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the | operator.

fn bitor(self, rhs: u32) -> Self::Output

Performs the | operation.

impl<const MIN: u32, const MAX: u32> BitOrAssign for BoundedU32<MIN, MAX>

fn bitor_assign(&mut self, rhs: BoundedU32<MIN, MAX>)

Performs the |= operation.

impl<const MIN: u32, const MAX: u32> BitOrAssign<&BoundedU32<MIN, MAX>> for u32

fn bitor_assign(&mut self, rhs: &BoundedU32<MIN, MAX>)

Performs the |= operation.

impl<const MIN: u32, const MAX: u32> BitOrAssign<&BoundedU32<MIN, MAX>> for BoundedU32<MIN, MAX>

fn bitor_assign(&mut self, rhs: &BoundedU32<MIN, MAX>)

Performs the |= operation.

impl<const MIN: u32, const MAX: u32> BitOrAssign<&u32> for BoundedU32<MIN, MAX>

fn bitor_assign(&mut self, rhs: &u32)

Performs the |= operation.

impl<const MIN: u32, const MAX: u32> BitOrAssign<BoundedU32<MIN, MAX>> for u32

fn bitor_assign(&mut self, rhs: BoundedU32<MIN, MAX>)

Performs the |= operation.

impl<const MIN: u32, const MAX: u32> BitOrAssign<u32> for BoundedU32<MIN, MAX>

fn bitor_assign(&mut self, rhs: u32)

Performs the |= operation.

impl<const MIN: u32, const MAX: u32> BitXor for BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the ^ operator.

fn bitxor(self, rhs: BoundedU32<MIN, MAX>) -> Self::Output

Performs the ^ operation.

impl<const MIN: u32, const MAX: u32> BitXor<&BoundedU32<MIN, MAX>> for u32

type Output = u32

The resulting type after applying the ^ operator.

fn bitxor(self, rhs: &BoundedU32<MIN, MAX>) -> Self::Output

Performs the ^ operation.

impl<const MIN: u32, const MAX: u32> BitXor<&BoundedU32<MIN, MAX>> for &u32

type Output = u32

The resulting type after applying the ^ operator.

fn bitxor(self, rhs: &BoundedU32<MIN, MAX>) -> Self::Output

Performs the ^ operation.

impl<const MIN: u32, const MAX: u32> BitXor<&BoundedU32<MIN, MAX>> for BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the ^ operator.

fn bitxor(self, rhs: &BoundedU32<MIN, MAX>) -> Self::Output

Performs the ^ operation.

impl<const MIN: u32, const MAX: u32> BitXor<&BoundedU32<MIN, MAX>> for &BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the ^ operator.

fn bitxor(self, rhs: &BoundedU32<MIN, MAX>) -> Self::Output

Performs the ^ operation.

impl<const MIN: u32, const MAX: u32> BitXor<&u32> for BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the ^ operator.

fn bitxor(self, rhs: &u32) -> Self::Output

Performs the ^ operation.

impl<const MIN: u32, const MAX: u32> BitXor<&u32> for &BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the ^ operator.

fn bitxor(self, rhs: &u32) -> Self::Output

Performs the ^ operation.

impl<const MIN: u32, const MAX: u32> BitXor<BoundedU32<MIN, MAX>> for u32

type Output = u32

The resulting type after applying the ^ operator.

fn bitxor(self, rhs: BoundedU32<MIN, MAX>) -> Self::Output

Performs the ^ operation.

impl<const MIN: u32, const MAX: u32> BitXor<BoundedU32<MIN, MAX>> for &u32

type Output = u32

The resulting type after applying the ^ operator.

fn bitxor(self, rhs: BoundedU32<MIN, MAX>) -> Self::Output

Performs the ^ operation.

impl<const MIN: u32, const MAX: u32> BitXor<BoundedU32<MIN, MAX>> for &BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the ^ operator.

fn bitxor(self, rhs: BoundedU32<MIN, MAX>) -> Self::Output

Performs the ^ operation.

impl<const MIN: u32, const MAX: u32> BitXor<u32> for BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the ^ operator.

fn bitxor(self, rhs: u32) -> Self::Output

Performs the ^ operation.

impl<const MIN: u32, const MAX: u32> BitXor<u32> for &BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the ^ operator.

fn bitxor(self, rhs: u32) -> Self::Output

Performs the ^ operation.

impl<const MIN: u32, const MAX: u32> BitXorAssign for BoundedU32<MIN, MAX>

fn bitxor_assign(&mut self, rhs: BoundedU32<MIN, MAX>)

Performs the ^= operation.

impl<const MIN: u32, const MAX: u32> BitXorAssign<&BoundedU32<MIN, MAX>> for u32

fn bitxor_assign(&mut self, rhs: &BoundedU32<MIN, MAX>)

Performs the ^= operation.

impl<const MIN: u32, const MAX: u32> BitXorAssign<&BoundedU32<MIN, MAX>> for BoundedU32<MIN, MAX>

fn bitxor_assign(&mut self, rhs: &BoundedU32<MIN, MAX>)

Performs the ^= operation.

impl<const MIN: u32, const MAX: u32> BitXorAssign<&u32> for BoundedU32<MIN, MAX>

fn bitxor_assign(&mut self, rhs: &u32)

Performs the ^= operation.

impl<const MIN: u32, const MAX: u32> BitXorAssign<BoundedU32<MIN, MAX>> for u32

fn bitxor_assign(&mut self, rhs: BoundedU32<MIN, MAX>)

Performs the ^= operation.

impl<const MIN: u32, const MAX: u32> BitXorAssign<u32> for BoundedU32<MIN, MAX>

fn bitxor_assign(&mut self, rhs: u32)

Performs the ^= operation.

impl<const MIN: u32, const MAX: u32> Borrow<u32> for BoundedU32<MIN, MAX>

fn borrow(&self) -> &u32

Immutably borrows from an owned value.

impl<const MIN: u32, const MAX: u32> Clone for BoundedU32<MIN, MAX>

fn clone(&self) -> Self

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<const MIN: u32, const MAX: u32> Copy for BoundedU32<MIN, MAX>

impl<const MIN: u32, const MAX: u32> Debug for BoundedU32<MIN, MAX>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<const MAX: u32> Default for BoundedU32<0, MAX>

Available on everywhere only.

fn default() -> Self

Returns the “default value” for a type.

impl<const MIN: u32, const MAX: u32> Display for BoundedU32<MIN, MAX>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<const MIN: u32, const MAX: u32> Div for BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the / operator.

fn div(self, rhs: BoundedU32<MIN, MAX>) -> Self::Output

Performs the / operation.

impl<const MIN: u32, const MAX: u32> Div<&BoundedU32<MIN, MAX>> for u32

type Output = u32

The resulting type after applying the / operator.

fn div(self, rhs: &BoundedU32<MIN, MAX>) -> Self::Output

Performs the / operation.

impl<const MIN: u32, const MAX: u32> Div<&BoundedU32<MIN, MAX>> for &u32

type Output = u32

The resulting type after applying the / operator.

fn div(self, rhs: &BoundedU32<MIN, MAX>) -> Self::Output

Performs the / operation.

impl<const MIN: u32, const MAX: u32> Div<&BoundedU32<MIN, MAX>> for BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the / operator.

fn div(self, rhs: &BoundedU32<MIN, MAX>) -> Self::Output

Performs the / operation.

impl<const MIN: u32, const MAX: u32> Div<&BoundedU32<MIN, MAX>> for &BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the / operator.

fn div(self, rhs: &BoundedU32<MIN, MAX>) -> Self::Output

Performs the / operation.

impl<const MIN: u32, const MAX: u32> Div<&u32> for BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the / operator.

fn div(self, rhs: &u32) -> Self::Output

Performs the / operation.

impl<const MIN: u32, const MAX: u32> Div<&u32> for &BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the / operator.

fn div(self, rhs: &u32) -> Self::Output

Performs the / operation.

impl<const MIN: u32, const MAX: u32> Div<BoundedU32<MIN, MAX>> for u32

type Output = u32

The resulting type after applying the / operator.

fn div(self, rhs: BoundedU32<MIN, MAX>) -> Self::Output

Performs the / operation.

impl<const MIN: u32, const MAX: u32> Div<BoundedU32<MIN, MAX>> for &u32

type Output = u32

The resulting type after applying the / operator.

fn div(self, rhs: BoundedU32<MIN, MAX>) -> Self::Output

Performs the / operation.

impl<const MIN: u32, const MAX: u32> Div<BoundedU32<MIN, MAX>> for &BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the / operator.

fn div(self, rhs: BoundedU32<MIN, MAX>) -> Self::Output

Performs the / operation.

impl<const MIN: u32, const MAX: u32> Div<u32> for BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the / operator.

fn div(self, rhs: u32) -> Self::Output

Performs the / operation.

impl<const MIN: u32, const MAX: u32> Div<u32> for &BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the / operator.

fn div(self, rhs: u32) -> Self::Output

Performs the / operation.

impl<const MIN: u32, const MAX: u32> DivAssign for BoundedU32<MIN, MAX>

fn div_assign(&mut self, rhs: BoundedU32<MIN, MAX>)

Performs the /= operation.

impl<const MIN: u32, const MAX: u32> DivAssign<&BoundedU32<MIN, MAX>> for u32

fn div_assign(&mut self, rhs: &BoundedU32<MIN, MAX>)

Performs the /= operation.

impl<const MIN: u32, const MAX: u32> DivAssign<&BoundedU32<MIN, MAX>> for BoundedU32<MIN, MAX>

fn div_assign(&mut self, rhs: &BoundedU32<MIN, MAX>)

Performs the /= operation.

impl<const MIN: u32, const MAX: u32> DivAssign<&u32> for BoundedU32<MIN, MAX>

fn div_assign(&mut self, rhs: &u32)

Performs the /= operation.

impl<const MIN: u32, const MAX: u32> DivAssign<BoundedU32<MIN, MAX>> for u32

fn div_assign(&mut self, rhs: BoundedU32<MIN, MAX>)

Performs the /= operation.

impl<const MIN: u32, const MAX: u32> DivAssign<u32> for BoundedU32<MIN, MAX>

fn div_assign(&mut self, rhs: u32)

Performs the /= operation.

impl<const MIN: u32, const MAX: u32> Eq for BoundedU32<MIN, MAX>

impl<const MIN: u32, const MAX: u32> From<BoundedU32<MIN, MAX>> for u32

fn from(bounded: BoundedU32<MIN, MAX>) -> Self

Converts to this type from the input type.

impl<const MIN: u32, const MAX: u32> From<BoundedU32<MIN, MAX>> for u64

fn from(bounded: BoundedU32<MIN, MAX>) -> Self

Converts to this type from the input type.

impl<const MIN: u32, const MAX: u32> From<BoundedU32<MIN, MAX>> for u128

fn from(bounded: BoundedU32<MIN, MAX>) -> Self

Converts to this type from the input type.

impl<const MIN: u32, const MAX: u32> From<BoundedU32<MIN, MAX>> for i64

fn from(bounded: BoundedU32<MIN, MAX>) -> Self

Converts to this type from the input type.

impl<const MIN: u32, const MAX: u32> From<BoundedU32<MIN, MAX>> for i128

fn from(bounded: BoundedU32<MIN, MAX>) -> Self

Converts to this type from the input type.

impl<const MIN: u32, const MAX: u32> FromStr for BoundedU32<MIN, MAX>

type Err = ParseError

The associated error which can be returned from parsing.

fn from_str(s: &str) -> Result<Self, Self::Err>

Parses a string s to return a value of this type.

impl<const MIN: u32, const MAX: u32> Hash for BoundedU32<MIN, MAX>

fn hash<H: Hasher>(&self, state: &mut H)

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl<const MIN: u32, const MAX: u32> LowerExp for BoundedU32<MIN, MAX>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<const MIN: u32, const MAX: u32> LowerHex for BoundedU32<MIN, MAX>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<const MIN: u32, const MAX: u32> Mul for BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the * operator.

fn mul(self, rhs: BoundedU32<MIN, MAX>) -> Self::Output

Performs the * operation.

impl<const MIN: u32, const MAX: u32> Mul<&BoundedU32<MIN, MAX>> for u32

type Output = u32

The resulting type after applying the * operator.

fn mul(self, rhs: &BoundedU32<MIN, MAX>) -> Self::Output

Performs the * operation.

impl<const MIN: u32, const MAX: u32> Mul<&BoundedU32<MIN, MAX>> for &u32

type Output = u32

The resulting type after applying the * operator.

fn mul(self, rhs: &BoundedU32<MIN, MAX>) -> Self::Output

Performs the * operation.

impl<const MIN: u32, const MAX: u32> Mul<&BoundedU32<MIN, MAX>> for BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the * operator.

fn mul(self, rhs: &BoundedU32<MIN, MAX>) -> Self::Output

Performs the * operation.

impl<const MIN: u32, const MAX: u32> Mul<&BoundedU32<MIN, MAX>> for &BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the * operator.

fn mul(self, rhs: &BoundedU32<MIN, MAX>) -> Self::Output

Performs the * operation.

impl<const MIN: u32, const MAX: u32> Mul<&u32> for BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the * operator.

fn mul(self, rhs: &u32) -> Self::Output

Performs the * operation.

impl<const MIN: u32, const MAX: u32> Mul<&u32> for &BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the * operator.

fn mul(self, rhs: &u32) -> Self::Output

Performs the * operation.

impl<const MIN: u32, const MAX: u32> Mul<BoundedU32<MIN, MAX>> for u32

type Output = u32

The resulting type after applying the * operator.

fn mul(self, rhs: BoundedU32<MIN, MAX>) -> Self::Output

Performs the * operation.

impl<const MIN: u32, const MAX: u32> Mul<BoundedU32<MIN, MAX>> for &u32

type Output = u32

The resulting type after applying the * operator.

fn mul(self, rhs: BoundedU32<MIN, MAX>) -> Self::Output

Performs the * operation.

impl<const MIN: u32, const MAX: u32> Mul<BoundedU32<MIN, MAX>> for &BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the * operator.

fn mul(self, rhs: BoundedU32<MIN, MAX>) -> Self::Output

Performs the * operation.

impl<const MIN: u32, const MAX: u32> Mul<u32> for BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the * operator.

fn mul(self, rhs: u32) -> Self::Output

Performs the * operation.

impl<const MIN: u32, const MAX: u32> Mul<u32> for &BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the * operator.

fn mul(self, rhs: u32) -> Self::Output

Performs the * operation.

impl<const MIN: u32, const MAX: u32> MulAssign for BoundedU32<MIN, MAX>

fn mul_assign(&mut self, rhs: BoundedU32<MIN, MAX>)

Performs the *= operation.

impl<const MIN: u32, const MAX: u32> MulAssign<&BoundedU32<MIN, MAX>> for u32

fn mul_assign(&mut self, rhs: &BoundedU32<MIN, MAX>)

Performs the *= operation.

impl<const MIN: u32, const MAX: u32> MulAssign<&BoundedU32<MIN, MAX>> for BoundedU32<MIN, MAX>

fn mul_assign(&mut self, rhs: &BoundedU32<MIN, MAX>)

Performs the *= operation.

impl<const MIN: u32, const MAX: u32> MulAssign<&u32> for BoundedU32<MIN, MAX>

fn mul_assign(&mut self, rhs: &u32)

Performs the *= operation.

impl<const MIN: u32, const MAX: u32> MulAssign<BoundedU32<MIN, MAX>> for u32

fn mul_assign(&mut self, rhs: BoundedU32<MIN, MAX>)

Performs the *= operation.

impl<const MIN: u32, const MAX: u32> MulAssign<u32> for BoundedU32<MIN, MAX>

fn mul_assign(&mut self, rhs: u32)

Performs the *= operation.

impl<const MIN: u32, const MAX: u32> Not for BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the ! operator.

fn not(self) -> Self::Output

Performs the unary ! operation.

impl<const MIN: u32, const MAX: u32> Not for &BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the ! operator.

fn not(self) -> Self::Output

Performs the unary ! operation.

impl<const MIN: u32, const MAX: u32> Octal for BoundedU32<MIN, MAX>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<const MIN: u32, const MAX: u32> Ord for BoundedU32<MIN, MAX>

fn cmp(&self, other: &BoundedU32<MIN, MAX>) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

where Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

where Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

where Self: Sized,

Restrict a value to a certain interval.

impl<const MIN: u32, const MAX: u32> PartialEq for BoundedU32<MIN, MAX>

fn eq(&self, other: &BoundedU32<MIN, MAX>) -> bool

Equality operator ==.

fn ne(&self, other: &Rhs) -> bool

Inequality operator !=.

impl<const MIN: u32, const MAX: u32> PartialEq<BoundedU32<MIN, MAX>> for u32

fn eq(&self, other: &BoundedU32<MIN, MAX>) -> bool

Equality operator ==.

fn ne(&self, other: &Rhs) -> bool

Inequality operator !=.

impl<const MIN: u32, const MAX: u32> PartialEq<u32> for BoundedU32<MIN, MAX>

fn eq(&self, other: &u32) -> bool

Equality operator ==.

fn ne(&self, other: &Rhs) -> bool

Inequality operator !=.

impl<const MIN: u32, const MAX: u32> PartialOrd for BoundedU32<MIN, MAX>

fn partial_cmp(&self, other: &BoundedU32<MIN, MAX>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl<const MIN: u32, const MAX: u32> PartialOrd<BoundedU32<MIN, MAX>> for u32

fn partial_cmp(&self, other: &BoundedU32<MIN, MAX>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl<const MIN: u32, const MAX: u32> PartialOrd<u32> for BoundedU32<MIN, MAX>

fn partial_cmp(&self, other: &u32) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl<const MIN: u32, const MAX: u32> Product for BoundedU32<MIN, MAX>

fn product<I: Iterator<Item = Self>>(iter: I) -> Self

Takes an iterator and generates Self from the elements by multiplying the items.

impl<'__a, const MIN: u32, const MAX: u32> Product<&'__a BoundedU32<MIN, MAX>> for BoundedU32<MIN, MAX>

fn product<I: Iterator<Item = &'__a Self>>(iter: I) -> Self

Takes an iterator and generates Self from the elements by multiplying the items.

impl<'__a, const MIN: u32, const MAX: u32> Product<&'__a BoundedU32<MIN, MAX>> for u32

fn product<I: Iterator<Item = &'__a BoundedU32<MIN, MAX>>>(iter: I) -> Self

Takes an iterator and generates Self from the elements by multiplying the items.

impl<const MIN: u32, const MAX: u32> Product<BoundedU32<MIN, MAX>> for u32

fn product<I: Iterator<Item = BoundedU32<MIN, MAX>>>(iter: I) -> Self

Takes an iterator and generates Self from the elements by multiplying the items.

impl<const MIN: u32, const MAX: u32> Rem for BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the % operator.

fn rem(self, rhs: BoundedU32<MIN, MAX>) -> Self::Output

Performs the % operation.

impl<const MIN: u32, const MAX: u32> Rem<&BoundedU32<MIN, MAX>> for u32

type Output = u32

The resulting type after applying the % operator.

fn rem(self, rhs: &BoundedU32<MIN, MAX>) -> Self::Output

Performs the % operation.

impl<const MIN: u32, const MAX: u32> Rem<&BoundedU32<MIN, MAX>> for &u32

type Output = u32

The resulting type after applying the % operator.

fn rem(self, rhs: &BoundedU32<MIN, MAX>) -> Self::Output

Performs the % operation.

impl<const MIN: u32, const MAX: u32> Rem<&BoundedU32<MIN, MAX>> for BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the % operator.

fn rem(self, rhs: &BoundedU32<MIN, MAX>) -> Self::Output

Performs the % operation.

impl<const MIN: u32, const MAX: u32> Rem<&BoundedU32<MIN, MAX>> for &BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the % operator.

fn rem(self, rhs: &BoundedU32<MIN, MAX>) -> Self::Output

Performs the % operation.

impl<const MIN: u32, const MAX: u32> Rem<&u32> for BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the % operator.

fn rem(self, rhs: &u32) -> Self::Output

Performs the % operation.

impl<const MIN: u32, const MAX: u32> Rem<&u32> for &BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the % operator.

fn rem(self, rhs: &u32) -> Self::Output

Performs the % operation.

impl<const MIN: u32, const MAX: u32> Rem<BoundedU32<MIN, MAX>> for u32

type Output = u32

The resulting type after applying the % operator.

fn rem(self, rhs: BoundedU32<MIN, MAX>) -> Self::Output

Performs the % operation.

impl<const MIN: u32, const MAX: u32> Rem<BoundedU32<MIN, MAX>> for &u32

type Output = u32

The resulting type after applying the % operator.

fn rem(self, rhs: BoundedU32<MIN, MAX>) -> Self::Output

Performs the % operation.

impl<const MIN: u32, const MAX: u32> Rem<BoundedU32<MIN, MAX>> for &BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the % operator.

fn rem(self, rhs: BoundedU32<MIN, MAX>) -> Self::Output

Performs the % operation.

impl<const MIN: u32, const MAX: u32> Rem<u32> for BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the % operator.

fn rem(self, rhs: u32) -> Self::Output

Performs the % operation.

impl<const MIN: u32, const MAX: u32> Rem<u32> for &BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the % operator.

fn rem(self, rhs: u32) -> Self::Output

Performs the % operation.

impl<const MIN: u32, const MAX: u32> RemAssign for BoundedU32<MIN, MAX>

fn rem_assign(&mut self, rhs: BoundedU32<MIN, MAX>)

Performs the %= operation.

impl<const MIN: u32, const MAX: u32> RemAssign<&BoundedU32<MIN, MAX>> for u32

fn rem_assign(&mut self, rhs: &BoundedU32<MIN, MAX>)

Performs the %= operation.

impl<const MIN: u32, const MAX: u32> RemAssign<&BoundedU32<MIN, MAX>> for BoundedU32<MIN, MAX>

fn rem_assign(&mut self, rhs: &BoundedU32<MIN, MAX>)

Performs the %= operation.

impl<const MIN: u32, const MAX: u32> RemAssign<&u32> for BoundedU32<MIN, MAX>

fn rem_assign(&mut self, rhs: &u32)

Performs the %= operation.

impl<const MIN: u32, const MAX: u32> RemAssign<BoundedU32<MIN, MAX>> for u32

fn rem_assign(&mut self, rhs: BoundedU32<MIN, MAX>)

Performs the %= operation.

impl<const MIN: u32, const MAX: u32> RemAssign<u32> for BoundedU32<MIN, MAX>

fn rem_assign(&mut self, rhs: u32)

Performs the %= operation.

impl<const MIN: u32, const MAX: u32> Shl<&u32> for BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the << operator.

fn shl(self, rhs: &u32) -> Self::Output

Performs the << operation.

impl<const MIN: u32, const MAX: u32> Shl<&u32> for &BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the << operator.

fn shl(self, rhs: &u32) -> Self::Output

Performs the << operation.

impl<const MIN: u32, const MAX: u32> Shl<u32> for BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the << operator.

fn shl(self, rhs: u32) -> Self::Output

Performs the << operation.

impl<const MIN: u32, const MAX: u32> Shl<u32> for &BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the << operator.

fn shl(self, rhs: u32) -> Self::Output

Performs the << operation.

impl<const MIN: u32, const MAX: u32> ShlAssign<&u32> for BoundedU32<MIN, MAX>

fn shl_assign(&mut self, rhs: &u32)

Performs the <<= operation.

impl<const MIN: u32, const MAX: u32> ShlAssign<u32> for BoundedU32<MIN, MAX>

fn shl_assign(&mut self, rhs: u32)

Performs the <<= operation.

impl<const MIN: u32, const MAX: u32> Shr<&u32> for BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the >> operator.

fn shr(self, rhs: &u32) -> Self::Output

Performs the >> operation.

impl<const MIN: u32, const MAX: u32> Shr<&u32> for &BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the >> operator.

fn shr(self, rhs: &u32) -> Self::Output

Performs the >> operation.

impl<const MIN: u32, const MAX: u32> Shr<u32> for BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the >> operator.

fn shr(self, rhs: u32) -> Self::Output

Performs the >> operation.

impl<const MIN: u32, const MAX: u32> Shr<u32> for &BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the >> operator.

fn shr(self, rhs: u32) -> Self::Output

Performs the >> operation.

impl<const MIN: u32, const MAX: u32> ShrAssign<&u32> for BoundedU32<MIN, MAX>

fn shr_assign(&mut self, rhs: &u32)

Performs the >>= operation.

impl<const MIN: u32, const MAX: u32> ShrAssign<u32> for BoundedU32<MIN, MAX>

fn shr_assign(&mut self, rhs: u32)

Performs the >>= operation.

impl<const MIN: u32, const MAX: u32> Sub for BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the - operator.

fn sub(self, rhs: BoundedU32<MIN, MAX>) -> Self::Output

Performs the - operation.

impl<const MIN: u32, const MAX: u32> Sub<&BoundedU32<MIN, MAX>> for u32

type Output = u32

The resulting type after applying the - operator.

fn sub(self, rhs: &BoundedU32<MIN, MAX>) -> Self::Output

Performs the - operation.

impl<const MIN: u32, const MAX: u32> Sub<&BoundedU32<MIN, MAX>> for &u32

type Output = u32

The resulting type after applying the - operator.

fn sub(self, rhs: &BoundedU32<MIN, MAX>) -> Self::Output

Performs the - operation.

impl<const MIN: u32, const MAX: u32> Sub<&BoundedU32<MIN, MAX>> for BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the - operator.

fn sub(self, rhs: &BoundedU32<MIN, MAX>) -> Self::Output

Performs the - operation.

impl<const MIN: u32, const MAX: u32> Sub<&BoundedU32<MIN, MAX>> for &BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the - operator.

fn sub(self, rhs: &BoundedU32<MIN, MAX>) -> Self::Output

Performs the - operation.

impl<const MIN: u32, const MAX: u32> Sub<&u32> for BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the - operator.

fn sub(self, rhs: &u32) -> Self::Output

Performs the - operation.

impl<const MIN: u32, const MAX: u32> Sub<&u32> for &BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the - operator.

fn sub(self, rhs: &u32) -> Self::Output

Performs the - operation.

impl<const MIN: u32, const MAX: u32> Sub<BoundedU32<MIN, MAX>> for u32

type Output = u32

The resulting type after applying the - operator.

fn sub(self, rhs: BoundedU32<MIN, MAX>) -> Self::Output

Performs the - operation.

impl<const MIN: u32, const MAX: u32> Sub<BoundedU32<MIN, MAX>> for &u32

type Output = u32

The resulting type after applying the - operator.

fn sub(self, rhs: BoundedU32<MIN, MAX>) -> Self::Output

Performs the - operation.

impl<const MIN: u32, const MAX: u32> Sub<BoundedU32<MIN, MAX>> for &BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the - operator.

fn sub(self, rhs: BoundedU32<MIN, MAX>) -> Self::Output

Performs the - operation.

impl<const MIN: u32, const MAX: u32> Sub<u32> for BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the - operator.

fn sub(self, rhs: u32) -> Self::Output

Performs the - operation.

impl<const MIN: u32, const MAX: u32> Sub<u32> for &BoundedU32<MIN, MAX>

type Output = BoundedU32<MIN, MAX>

The resulting type after applying the - operator.

fn sub(self, rhs: u32) -> Self::Output

Performs the - operation.

impl<const MIN: u32, const MAX: u32> SubAssign for BoundedU32<MIN, MAX>

fn sub_assign(&mut self, rhs: BoundedU32<MIN, MAX>)

Performs the -= operation.

impl<const MIN: u32, const MAX: u32> SubAssign<&BoundedU32<MIN, MAX>> for u32

fn sub_assign(&mut self, rhs: &BoundedU32<MIN, MAX>)

Performs the -= operation.

impl<const MIN: u32, const MAX: u32> SubAssign<&BoundedU32<MIN, MAX>> for BoundedU32<MIN, MAX>

fn sub_assign(&mut self, rhs: &BoundedU32<MIN, MAX>)

Performs the -= operation.

impl<const MIN: u32, const MAX: u32> SubAssign<&u32> for BoundedU32<MIN, MAX>

fn sub_assign(&mut self, rhs: &u32)

Performs the -= operation.

impl<const MIN: u32, const MAX: u32> SubAssign<BoundedU32<MIN, MAX>> for u32

fn sub_assign(&mut self, rhs: BoundedU32<MIN, MAX>)

Performs the -= operation.

impl<const MIN: u32, const MAX: u32> SubAssign<u32> for BoundedU32<MIN, MAX>

fn sub_assign(&mut self, rhs: u32)

Performs the -= operation.

impl<const MIN: u32, const MAX: u32> Sum for BoundedU32<MIN, MAX>

fn sum<I: Iterator<Item = Self>>(iter: I) -> Self

Takes an iterator and generates Self from the elements by “summing up” the items.

impl<'__a, const MIN: u32, const MAX: u32> Sum<&'__a BoundedU32<MIN, MAX>> for BoundedU32<MIN, MAX>

fn sum<I: Iterator<Item = &'__a Self>>(iter: I) -> Self

Takes an iterator and generates Self from the elements by “summing up” the items.

impl<'__a, const MIN: u32, const MAX: u32> Sum<&'__a BoundedU32<MIN, MAX>> for u32

fn sum<I: Iterator<Item = &'__a BoundedU32<MIN, MAX>>>(iter: I) -> Self

Takes an iterator and generates Self from the elements by “summing up” the items.

impl<const MIN: u32, const MAX: u32> Sum<BoundedU32<MIN, MAX>> for u32

fn sum<I: Iterator<Item = BoundedU32<MIN, MAX>>>(iter: I) -> Self

Takes an iterator and generates Self from the elements by “summing up” the items.

impl<const MIN: u32, const MAX: u32> TryFrom<BoundedU32<MIN, MAX>> for u8

type Error = TryFromIntError

The type returned in the event of a conversion error.

fn try_from(n: BoundedU32<MIN, MAX>) -> Result<Self, Self::Error>

Performs the conversion.

impl<const MIN: u32, const MAX: u32> TryFrom<BoundedU32<MIN, MAX>> for u16

type Error = TryFromIntError

The type returned in the event of a conversion error.

fn try_from(n: BoundedU32<MIN, MAX>) -> Result<Self, Self::Error>

Performs the conversion.

impl<const MIN: u32, const MAX: u32> TryFrom<BoundedU32<MIN, MAX>> for usize

type Error = TryFromIntError

The type returned in the event of a conversion error.

fn try_from(n: BoundedU32<MIN, MAX>) -> Result<Self, Self::Error>

Performs the conversion.

impl<const MIN: u32, const MAX: u32> TryFrom<BoundedU32<MIN, MAX>> for i8

type Error = TryFromIntError

The type returned in the event of a conversion error.

fn try_from(n: BoundedU32<MIN, MAX>) -> Result<Self, Self::Error>

Performs the conversion.

impl<const MIN: u32, const MAX: u32> TryFrom<BoundedU32<MIN, MAX>> for i16

type Error = TryFromIntError

The type returned in the event of a conversion error.

fn try_from(n: BoundedU32<MIN, MAX>) -> Result<Self, Self::Error>

Performs the conversion.

impl<const MIN: u32, const MAX: u32> TryFrom<BoundedU32<MIN, MAX>> for i32

type Error = TryFromIntError

The type returned in the event of a conversion error.

fn try_from(n: BoundedU32<MIN, MAX>) -> Result<Self, Self::Error>

Performs the conversion.

impl<const MIN: u32, const MAX: u32> TryFrom<BoundedU32<MIN, MAX>> for isize

type Error = TryFromIntError

The type returned in the event of a conversion error.

fn try_from(n: BoundedU32<MIN, MAX>) -> Result<Self, Self::Error>

Performs the conversion.

impl<const MIN: u32, const MAX: u32> TryFrom<i8> for BoundedU32<MIN, MAX>

type Error = TryFromError

The type returned in the event of a conversion error.

fn try_from(n: i8) -> Result<Self, Self::Error>

Performs the conversion.

impl<const MIN: u32, const MAX: u32> TryFrom<i16> for BoundedU32<MIN, MAX>

type Error = TryFromError

The type returned in the event of a conversion error.

fn try_from(n: i16) -> Result<Self, Self::Error>

Performs the conversion.

impl<const MIN: u32, const MAX: u32> TryFrom<i32> for BoundedU32<MIN, MAX>

type Error = TryFromError

The type returned in the event of a conversion error.

fn try_from(n: i32) -> Result<Self, Self::Error>

Performs the conversion.

impl<const MIN: u32, const MAX: u32> TryFrom<i64> for BoundedU32<MIN, MAX>

type Error = TryFromError

The type returned in the event of a conversion error.

fn try_from(n: i64) -> Result<Self, Self::Error>

Performs the conversion.

impl<const MIN: u32, const MAX: u32> TryFrom<i128> for BoundedU32<MIN, MAX>

type Error = TryFromError

The type returned in the event of a conversion error.

fn try_from(n: i128) -> Result<Self, Self::Error>

Performs the conversion.

impl<const MIN: u32, const MAX: u32> TryFrom<isize> for BoundedU32<MIN, MAX>

type Error = TryFromError

The type returned in the event of a conversion error.

fn try_from(n: isize) -> Result<Self, Self::Error>

Performs the conversion.

impl<const MIN: u32, const MAX: u32> TryFrom<u8> for BoundedU32<MIN, MAX>

type Error = TryFromError

The type returned in the event of a conversion error.

fn try_from(n: u8) -> Result<Self, Self::Error>

Performs the conversion.

impl<const MIN: u32, const MAX: u32> TryFrom<u16> for BoundedU32<MIN, MAX>

type Error = TryFromError

The type returned in the event of a conversion error.

fn try_from(n: u16) -> Result<Self, Self::Error>

Performs the conversion.

impl<const MIN: u32, const MAX: u32> TryFrom<u32> for BoundedU32<MIN, MAX>

type Error = TryFromError

The type returned in the event of a conversion error.

fn try_from(n: u32) -> Result<Self, Self::Error>

Performs the conversion.

impl<const MIN: u32, const MAX: u32> TryFrom<u64> for BoundedU32<MIN, MAX>

type Error = TryFromError

The type returned in the event of a conversion error.

fn try_from(n: u64) -> Result<Self, Self::Error>

Performs the conversion.

impl<const MIN: u32, const MAX: u32> TryFrom<u128> for BoundedU32<MIN, MAX>

type Error = TryFromError

The type returned in the event of a conversion error.

fn try_from(n: u128) -> Result<Self, Self::Error>

Performs the conversion.

impl<const MIN: u32, const MAX: u32> TryFrom<usize> for BoundedU32<MIN, MAX>

type Error = TryFromError

The type returned in the event of a conversion error.

fn try_from(n: usize) -> Result<Self, Self::Error>

Performs the conversion.

impl<const MIN: u32, const MAX: u32> UpperExp for BoundedU32<MIN, MAX>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<const MIN: u32, const MAX: u32> UpperHex for BoundedU32<MIN, MAX>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.